Are you looking for:
|
Auxiliary Shaft Pulley DOHC - w/Rear Lip - Resin (Fiat Pininfarina 124, 131, Lancia 2.0L 1980-On) - U8
This is a lightweight resin auxiliary shaft timing gear for all fuel injected 2.0L engines in Fiat 124, 131 and Lancia Beta from 7-1979 onward.
Typically considered the "FI" style of auxiliary shaft pulley, for use on motors whose upper cam gears do not have belt guides.
Notice the belt lip on the inside of the pulley.
Condition: USED (8 of 10)
Good used condition, no stress cracks on backside, and no saddling of teeth.
|
Relay 5-Pin Normally Open Sipea 0440, 0445, Wepoo 90050, 90040, ValVar 231002, Bosch 332 014 107 - NEW
A 5-pin, normally open relay. Equivalent of Sipea, 0440, 0445, Wepoo 90040 or 90050, and Bosch 332 014 107.
For OE, use PN 4320629.
Condition: NEW
New and unused.
|
Windshield Washer Fluid Jet Bushing for 8mm Hole (Fiat 124 Spider, Coupe, 131, 128, X19 to 1978) - NEW
A washer fluid jet nylon holder / bushing as used on most Fiat cars through 1978.
For use on cars with 8mm opening in body. Later cars with 6mm hole use 4289603.
Condition: NEW
New and unused.
|
Camshaft Pulley DOHC Exhaust w/o Lip LIGHT (Fiat Pininfarina 124, 131/Brava, Lancia Beta 1979-On) - OE
This is a Factory OE steel exhaust camshaft shaft pulley for all Fiat and Lancia DOHC engines 1979-On.
Does not have a retaining lip on the outside edge of the pulley.
This is the late style with lightening holes from the factory. Hard to find.
Condition: OE NOS
Original Equipment New Old Stock
New and unused.
|
Radiator Hose - Water Pump to Lower Radiator 125mm / 40mm (Fiat 850 Spider, Coupe 1969-On ) - NEW
This is a high quality Italian maker lower radiator hose that connects between the water pump and the radiator for 1969 on Fiat 850 Coupe and Spider.
Hose has 125mm long leg, with 40mm diameter, to the water pump.
For earlier cars use 4110180 (170mm / 30mm)
Condition: NEW
New and unused.
|